Posts

Showing posts from August, 2015

Featured Post

ESP32 SDR: from failed 433 MHz experiments to live phone decoding

Image
An ESP32-S3 investigation, updated with live Android decoding and physical tests on 17 October 2026. An ESP32-S3 can expose real radio samples. The question is how far that capability carries toward useful applications. Conceptual illustration. I wanted to turn an ESP32 into something more ambitious than another Wi-Fi gadget: a small radio instrument that could capture a remote-control transmission, send the recording to a phone, decode it and eventually reproduce it. The starting point was the ESPARGOS esp-sdr project , which exposes raw radio samples from hardware already inside supported ESP32 chips. That is an exciting capability. It also raises an easy-to-misunderstand question: if software can ask the chip to tune to a frequency, can the chip actually receive useful information there? We tested that question through firmware changes, controlled radio transmissions, independent receivers and a Flutter phone app. We tried GPS, broadcast FM, 433 MHz remote-control signals, n...

Turn your smartphone or tablet into a 3d hologram - Amazing DIY project for kids

Image
Hey Folks, So recently i saw an amazing instructable on 3d projection pyramid  and it seemed so cool, so me and my friend tried it out (its mostly my friend). It turned out to be so amazing that i decided to write about this on my blog. So here i am. And if you are a parent or kid looking for an amazing weekend project or something to show on science fair, you have come to the right place :D When i say its amazing, its totally an understatement, you will be a taken back by the simplicity of the project. Its really easy and it only involves some plastic and a smartphone or tablet with decent resolution display. Both are easy finds these days. Basically you will see an illusion of 3d projection display without the need of any sophisticated hardware or 3d glasses. Its really cool when you actually see it live. To make it you could need to use thin sheet of reflective material, first we used acrylic sheet with was thick and it gave us bad results due to dual reflections...