Posts

Showing posts from 2015

Featured Post

Running four AI models fully offline on a Nextion ONX3248G035

Image
A while back I unboxed a Nextion touchscreen dev board and vibe-coded a WiFi auditor onto it . That board has been sitting on my desk ever since, and one question kept nagging: this thing has 8 MB of PSRAM and a dual-core ESP32-S3. Could it run an actual language model? Not talk to one over WiFi — run one. Turns out: yes. Four of them, in fact. No internet, no server, no phone, no PC. Everything in this video is generated by the chip on the board. All four models, on the board, offline. Loading a model from the SD card, then generating. What is actually running The board boots into a menu. Tap a model, it loads and starts generating. All of these were trained from scratch on an M2 Max in well under an hour. Malayalam English Arithmetic Icons Parameters 7.6M 7.6M 1.0M 577K Flash 3.95 MB 3.95 MB 0.41 MB 0.58 MB Speed 13.0 tok/s 14.9 tok/s 20.7 tok/s 3.4 s/image First things first: this is not a Nextion HMI The ONX3248G035 is sold under Nextion branding, and the name is...

My 3d printing saga : Part 2 - Reinforcements Are Here!

Image
Hey guys, This is the second part of my blog posts on my prusa i3 build, if you havn't read the previous episode, you can find it here -  http://www.h4hacks.com/2015/06/beginning-of-my-3d-printing-saga-first.html Apologies to my readers as i am taking so long to write about the work that i have done. I request everyone to be patient, (lot of you guys ask me on facebook and all, Thanks) as i am finding it quite difficult to find time to do so. Ok now if you have read my first post, then you know that i made a huge mistake by buying the whole kit from the cheapest Indian seller at that time (Sep 2014). So whats done is done, i want to build a 3D printer. So i decided to burn lot more cash to replace all the crappy parts that was in the kit i bought. First of all, I purchased a new set of printed parts from global easy buy in ebay (geb.ebay.in). Here i bought a set of neatly printed prusa i3 parts. You can see the difference here Y Idler end Neat quality Finally ...